Puracid

Liquid cleanser for the effective removal of stubborn lime scale deposits and lime soap residues. Good cleaning effect also on fats and soiling. Does not cause corrosive fumes. The detergent raw materials are biodegradable. Surfaces and fittings cleaned with puracid are hygienically clean.

Application areas

For the entire sanitary area, indoor and outdoor swimming pools, bath rooms, toilets, industrial kitchens, stone tiles, fittings, sanitary porcelain, synthetic pools, chrome and chrome steel.

Dosage

Light deposits / soiling: Add 1 - 5 dl to 10 l water (1 - 5%).

Heavy deposits / soiling: Add 0.5 - 1 l to 10 l water (5 - 10%).

Instructions for use

Wet acid-sensitive grouting with water before the application. Apply or spray solution. Treat stubborn deposits with a cleaning pad. Rinse with clean water.

Wash walls from the bottom to the top to avoid water streaks / runs.

Suitable for machine and manual application.

Product consumption

10 l solution for 40 - 120 m2

Special advice

Wear respiratory tract protection when spraying the product.

In the case of prolonged contact or sensitive skin, wear gloves.

Do not use on limestone (e.g. slate, travertine, Solnhofer, marble) or synthetic stone (e.g. terrazzo).

Test the acid-resistance of enamel and glazed tiles in an inconspicuous place before cleaning.

The manufacturer declines all responsibility for damages from improper product use.

Corrosive product. Observe product label warnings.

Technical data

Storage stability: at least 2 years

pH value (concentrated): 0.5

pH value (1% solution): 2

Ingredients: inorganic acid, non-ionic surfactants, perfume, water