For all sanitary facilities. Also suitable for indoor swimming pools and catering kitchens. Removes heavy limescale. Excellent cleaning performance on chrome steel, porcelain, stone tile, etc. Gentle to surfaces.
Liquid cleanser for the effective removal of stubborn lime scale deposits and lime soap residues. Good cleaning effect also on fats and soiling. Does not cause corrosive fumes. The detergent raw materials are biodegradable. Surfaces and fittings cleaned with puracid are hygienically clean.
For the entire sanitary area, indoor and outdoor swimming pools, bath rooms, toilets, industrial kitchens, stone tiles, fittings, sanitary porcelain, synthetic pools, chrome and chrome steel.
Light deposits / soiling: Add 1 - 5 dl to 10 l water (1 - 5%).
Heavy deposits / soiling: Add 0.5 - 1 l to 10 l water (5 - 10%).
Instructions for use
Wet acid-sensitive grouting with water before the application. Apply or spray solution. Treat stubborn deposits with a cleaning pad. Rinse with clean water.
Wash walls from the bottom to the top to avoid water streaks / runs.
Suitable for machine and manual application.
10 l solution for 40 - 120 m2
Wear respiratory tract protection when spraying the product.
In the case of prolonged contact or sensitive skin, wear gloves.
Do not use on limestone (e.g. slate, travertine, Solnhofer, marble) or synthetic stone (e.g. terrazzo).
Test the acid-resistance of enamel and glazed tiles in an inconspicuous place before cleaning.
The manufacturer declines all responsibility for damages from improper product use.
Corrosive product. Observe product label warnings.
Storage stability: at least 2 years
pH value (concentrated): 0.5
pH value (1% solution): 2
Ingredients: inorganic acid, non-ionic surfactants, perfume, water