Tax included

For coating PVC, linoleum and stone floor coverings. Specifically designed for porous floor coverings (old linoleum, cement grit, concrete, magnesite floors), particularly screed (wood cement). High filling capacity, spreads very well.

For the basic treatment of porous floor coverings. Provides a hard, long lasting, dirt-resistant protective film. Slip-resistant. Suitable for sport floors. Complies with the DIN 18 032, paragraph 7.5 “Gleitsicherheit”. Pre-treatment for porous linoleum.

Application areas

For porous floor coverings like PVC, linoleum, synthetic stone, cement, armoured con-crete, synthetic resin, marble and coverings applied with the spatula.


Apply undiluted.

Instructions for use

Preparation: Strip the floor. Rinse and allow to dry.

Application: Pour the undiluted product onto the clean, stripped floor and spread with a polish applicator regularly in lanes. Allow the first coat to dry to a dust-dry condition. Apply a second coat to absorbent floor coverings after approximately 1 hour.

Product consumption

15 - 30 g per m2 and coat.

Special advice

Only apply on wax-free and oil-free floors. Cement and armoured concrete has to be absolutely dry when coated. Rinse the polish applicator with water after use.

Test the material / product compatibility in an inconspicuous place before use.

The manufacturer declines all responsibility for damages from improper product use.

Technical data

Storage stability: at least 2 years

Storage: do not store below 0°C

pH value (concentrated): 8.5

Ingredients: plastics, waxes, surfactants, perfume, preservative